Materials & Safety Data
We use trusted, professional-grade wallcovering products on every project. Below you’ll find the specific primers and materials we use, along with links to their official manufacturer safety data sheets.
PRO-935 R-35® Adhesion Promoting Wallcovering Primer
Manufacturer: Roman Products, LLC
We use this primer to help wallcovering adhere properly to surfaces that are naturally resistant to bonding, ensuring a stable, long-lasting installation.
Safety Summary
- Classified as Not Hazardous under the OSHA Hazard Communication Standard (29 CFR \xC2\xA71910.1200)
- Water-based, low-VOC formula (0.25% VOC)
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling
Benjamin Moore Multi-Purpose Primer® (067)
Manufacturer: Benjamin Moore & Co.
We use this white-pigmented primer to prepare surfaces for wallcovering, chosen alongside Roman’s R-35 depending on the specific wallcovering being installed.
Safety Summary
- Not considered hazardous under the OSHA Hazard Communication Standard (29 CFR §1910.1200)
- Water-based, low-VOC formula (regulatory limit under 100 g/L)
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling
Roman PRO-999 Rx-35® Sealer/Primer
Manufacturer: Roman Products, LLC
We use this penetrating sealer/primer to prepare porous or damaged surfaces — torn drywall, drywall mud, spackle, and residual wallpaper paste — for new wallcovering or paint. It complements our R-35 primer, which is used instead on slick, non-porous surfaces like tile and glass.
Safety Summary
- Not considered hazardous under the OSHA Hazard Communication Standard for normal handling
- Water-based, low-VOC formula (regulatory limit under 25 g/L)
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling
USG Sheetrock® Plus 3® Joint Compound
Manufacturer: United States Gypsum Company
We use this lightweight, ready-mixed joint compound for embedding tape and finishing drywall joints ahead of a smooth, paintable, or paperable wall surface. It weighs up to 25% less than conventional compound, shrinks less, and sands easily.
Safety Summary
- Contains crystalline silica; use with adequate ventilation and dust control during sanding
- Wear eye and skin protection when handling or sanding
- Use a NIOSH-approved dust respirator when sanding to avoid inhaling dust
Muddskip Heavy Duty Drywall Additive
Manufacturer: Muddskip
We mix this additive into joint compound to transform it into a plaster-like base coat, cutting sanding and labor time on drywall repairs and skim coats ahead of wallcovering or paint.
Safety Summary
- Not intended for consumption; keep out of reach of children and pets
- Avoid contact with eyes; do not ingest
- Use only as directed for drywall repair and finishing applications
Benjamin Moore Aura® Interior Paint
Manufacturer: Benjamin Moore & Co.
We use this ultra-premium paint on interior walls and trim when a project calls for exceptional color depth, richness, and durability, including in high-visibility rooms where lasting color matters most.
Safety Summary
- Not considered hazardous under the OSHA Hazard Communication Standard
- Low-VOC formula (regulatory limit under 50 g/L)
- Standard precautions apply: ventilate the area, avoid prolonged skin contact, wash hands after handling
Benjamin Moore Command® Waterborne Acrylic Urethane
Manufacturer: Benjamin Moore & Co.
We use this extremely durable, single-component coating on high-traffic surfaces — trim, doors, handrails, and more — where fast return-to-service and long-term abrasion resistance matter.
Safety Summary
- Causes serious eye irritation and may cause an allergic skin reaction — wear eye and skin protection
- Low-VOC formula (regulatory limit under 50 g/L)
- Use in a well-ventilated area and wash hands after handling
Benjamin Moore Regal® Select Interior Paint
Manufacturer: Benjamin Moore & Co.
We use this trusted, everyday interior paint for its durability, washability, and stain release, standing up to the everyday wear and tear of active households.
Safety Summary
- Not considered hazardous under the OSHA Hazard Communication Standard
- Low-VOC formula (regulatory limit under 50 g/L)
- Standard precautions apply: ventilate the area, avoid prolonged skin contact, wash hands after handling
Benjamin Moore Scuff-X® Interior Paint
Manufacturer: Benjamin Moore & Co.
We use this patented scuff- and chip-resistant paint in hallways, stairwells, and other high-traffic areas where walls take a beating, without sacrificing a clean painted finish.
Safety Summary
- Low-VOC formula meeting the most stringent VOC regulations
- Contains anti-microbial additives that inhibit mold and mildew growth on the paint film
- Standard precautions apply: ventilate the area, avoid prolonged skin contact, wash hands after handling
Roman PRO-880 Ultra® Clear Strippable Wallcovering Adhesive
Manufacturer: Roman Products, LLC
We use this premium, strippable clear adhesive for most wallcovering types, including non-woven, vinyl, and grasscloth. It offers excellent wet tack and a generous open time for positioning, works with pasting machines, and features a zero-VOC, low-odor formula that dries clear and cleans up easily with water.
Safety Summary
- Classified as Not Hazardous under the OSHA Hazard Communication Standard (29 CFR §1910.1200)
- Zero VOC (Regulatory), as calculated per EPA Method 24
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling
Roman 780 Machinable Heavy Duty Clear Wallcovering Adhesive
Manufacturer: Roman Products, LLC
We use this commercial-grade clear adhesive for medium to heavyweight wallcoverings when working with a pasting machine. Its flowable, pourable consistency ensures even, efficient application, with strong wet tack and a low-odor, low-VOC formula.
Safety Summary
- VOC (Regulatory): less than 5 g/L
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling
- Store in a cool, dry place; do not freeze
Roman PRO-774 Clay Strippable Wallcovering Adhesive
Manufacturer: Roman Products, LLC
We use this commercial-grade clay adhesive on large commercial jobs, hotels, office buildings, and hospitals, where its maximum wet tack holds the heaviest wallcoverings. It flows easily through pasting machines and is strippable with fabric-backed vinyl over bare drywall.
Safety Summary
- WARNING: This product can expose users to crystalline quartz, which is known to the State of California to cause cancer (Prop 65)
- VOC (Regulatory): less than 5 g/L; VOC (Actual): less than 1%
- Standard precautions apply: use in a ventilated area, avoid prolonged skin/eye contact, wash hands after handling