Cabinet Painting in Plano, Frisco, McKinney and Across the DFW Metroplex
Trusted painting and wallpaper experts serving DFW since 1985
- 40 years of professional experience
- Featured in D Magazine
What to Expect From Our Cabinet Painting
Painting your cabinets is one of the most cost-effective ways to change how a kitchen or bathroom looks without replacing the boxes, doors and counters. It’s also a job where shortcuts show fast: cabinet doors get opened, closed and grabbed every day, so the finish has to stick and hold up.
We remove the doors and drawer fronts ourselves, prep every surface the same careful way we prep any job, and paint with Benjamin Moore Command in a satin finish. A typical kitchen takes about a week, start to finish. Cabinet painting is part of our full service painting, so if the kitchen walls or a nearby powder room need paint or wallpaper too, one team handles all of it.
Our Cabinet Painting Process
From the first visit to the final walkthrough, here’s what to expect.
The Estimate Visit
For smaller jobs we can sometimes put together an estimate from photos and a description of the space. For a full kitchen, we’ll walk it in person and talk through color choices. We have a color consultant if you’d like help choosing, and Benjamin Moore’s custom color-matching system if you’re matching an existing color, a designer’s spec or a sample you provide.
Removing Doors and Protecting the Space
We remove the cabinet doors and drawer fronts ourselves, then protect the floors, furniture and everything nearby before any prep starts.
Prep and Repair
Cabinets get the same prep steps we use on every job: filling dings and smoothing imperfections before any paint goes on. Imperfections show through paint just as easily as they show through wallpaper, and on cabinets they’re seen up close every day.
Painting
Depending on the job, we spray or brush and roll, using Benjamin Moore Command in a satin sheen. Command is a water-based urethane that adheres to virtually any surface, dries to the touch in about an hour, and won’t yellow over time the way oil-based paints do. Benjamin Moore’s Command product page rates it ready to return to service within an hour, so a kitchen is back in use quickly.
Hardware, Cleanup and Walkthrough
We rehang the doors and drawer fronts, and we can install new hardware if you’re updating it. Then we clean up thoroughly and walk the kitchen with you before we call the job finished.
Why We Use Benjamin Moore Command on Cabinets
We use Benjamin Moore paint exclusively. Paint quality comes down to the grade of titanium dioxide in the formula, and Benjamin Moore uses the highest grade available, which is why it goes on uniformly, matches consistently between cans and touches up easily later.
For woodwork, Command is the product we trust, and satin is the sheen we usually recommend for cabinets. We no longer use oil-based paint at all: Command outperforms it, has zero VOCs and no odor, and stays the color you chose instead of yellowing over the years. Paint choice matters indoors: the EPA’s guide to volatile organic compounds lists paints among common household sources of VOCs and recommends increasing ventilation when using them.
What We Paint
- Kitchen cabinets
- Cabinet interiors and shelves
- Bathroom vanities
- Kitchen islands
- Built-ins, bookcases and wet bars
Why Paint Instead of Replace
- Keeps your existing cabinets and layout
- Far less demolition and downtime
- Any Benjamin Moore color, custom matched
- New hardware installed if you want a full refresh
Prep Is What Makes a Cabinet Finish Last
The real difference between a professional paint job and a DIY one almost always comes down to prep and materials. Homeowners often don’t have the technique for clean, crisp lines, and they tend to reach for cheaper paint that simply doesn’t perform as well or hold up over time. On cabinets, that shows up as chipping around handles and edges.
We want to be fair: we’ve seen plenty of homeowner work that impressed us. But cabinets take more daily wear than almost any painted surface in the house, so the prep and the paint have to be right the first time.
Expert Tip
Caring for Painted Cabinets
Command dries to the touch in about an hour, so your kitchen is back in use quickly, but the finish needs time to fully harden. Wait 7 days before scrubbing the cabinets or putting them through heavy use. After that, wipe them with a soft damp cloth and mild soap rather than abrasive cleaners or scrub pads, which can dull the finish.
Frequently Asked Questions
Common questions about cabinet painting in Plano and across DFW.
What paint and sheen do you use on cabinets?
Benjamin Moore Command, the water-based urethane we use on all woodwork, usually in a satin sheen. It adheres to virtually any surface, has zero VOCs and zero odor, and won’t yellow over time.
How long does cabinet painting take?
A typical kitchen takes about a week, start to finish. Command dries to the touch in about an hour, but wait 7 days before scrubbing the cabinets or putting them through heavy use.
Do you paint the inside of the cabinets?
We can. Depending on what you need, we paint cabinet interiors and shelves as well as the outsides, doors and drawer fronts.
Can you install new hardware?
Yes. If you’re updating your pulls and knobs, we can install the new hardware when we rehang the doors and drawer fronts.
Can you help us choose a color?
Yes. We have a color consultant, and because we work exclusively with Benjamin Moore, we can also match an existing color, a designer’s specification or a sample you provide.
Prefer to talk? (469) 585-8664